|
| |
Contents | Index
Assignable Cause Column dialog box
Before you may enter Assignable Causes onto a chart, you must select a column
for storing the Assignable Causes in the Assignable Cause Column dialog box.
From the drop down list, select a column in the data editor for storing the
assignable cause for this variable. Each characteristic can have only a single
Assignable cause column selected at a time, and each subgroup can have only a
single assignable cause within that column.
Note:
- Any Assignable Causes entered will write over any information already in that
row (the first row of the selected subgroup) in the column specified.
- The maximum length of an Assignable Cause is determined by the width setting in the Chart Format dialog box for the column which contains the Assignable Cause.
|
